Item Definition

This article may need to be rewritten. Please help improve this article. The discussion page may contain suggestions.

Item Definition

IDE Sections: 2DFX • AMAT • ANIM • CARS • HIER • HAND • MLO • OBJS PATH • PEDS • TANM • TOBJ • TREE • TXDP • WEAP

Item definition files, usually identicated by the file extension .ide, are used to declare many different aspects for the map system or to specify special behaviour rules for one of the aspects. They are stored in plain text format, so that they can be opened by any text editing program (like Notepad), but there are also some tools to simplify editing.

Overview

The item definition files are split up into several sections. Each section itself is optional which means there is no rule descriping in which order you use the sections. Also there is no need for using all sections inside your file.

Format and syntax description

The basic structure of the different sections is pretty simple. Each section starts with an 4 character identifier indicating how the content of the section gets interpreted by the game. The identifier is followed by the definition entries. Every entry takes one line and every line follows certain rules which get descriped in the articles handling the sections in detail (see below). However lines can also be empty or commented. If so they get ignored by the games parser. The end of every section gets indicated by the string "end". Both (section identifier and terminating string) are not case sensitive, but by default they are written in lower case.

Comments are usually indicated by the character '#'. It is possible to add comments to the end of an line, but breaking the line format for the current section using comments may cause hard to find game crashes during loading stage. This is why a comment should always be placed on an seperate line. Comments can also be placed outside of sections.

The line format itself is always the same. It only differs in the number of parameters. Parameters are the semantical content of the line. Parameters are usually seperated by a comma character. Starting and ending whitespace characters get trimmed. However using whitespaces inside a parameter is not possible in almost every case so that they are simply used to structure the file more clearly. Strings can be encased by the character '"', but this is optional and rarely used by default.

Section example

objs
...
end

Sections

The following table contains basic information about all known sections. For additional information read the articles itself.

Identifier	Supported games	Description
OBJS		Most important section: defines objects for the map.
TOBJ		Basicly does the same as OBJS, but it has two additional parameters defining the ingame time range the object can get rendered.
ANIM		Basicly does the same as OBJS, but it has one additional parameter identicating an IFP or WAD animation file to assign an animation to the object.
PEDS		Used to define "pedestrians" (Random NPC's).
WEAP		Used to define weapons.
CARS		Used to define vehicles.
HIER		Partly unknown. Used to define objects for interactions with actors for example in cutscenes.
TXDP		Used to virtually extent texture dictionarys.
2DFX		Used to add particles to objects, defined in one of the sections above (except TXDP).
PATH		Used to create waypoints for random NPC spawns (Paths).
TREE		–
TANM		Used to combine TOBJ and ANIM sections.
MLO		–
AMAT		–

IDE Flags

Flags are used to specify the behaviour of objects. They are signed 32-bit integer values where each bit descripes an boolean value of an special aspect. The following table shows the standart flags used for objects defined in OBJS, TOBJ and ANIM section.

Flag	Supported games	Binary	Description
-1	–	1111 1111 1111 1111 1111 1111	Enables all flags. [1] Never used by default.
1		0000 0000 0000 0000 0000 0001	Wet effect (objects appear darker).
2		0000 0000 0000 0000 0000 0010	Indicates that the object gets rendered at night for objects defined in TOBJ.
4		0000 0000 0000 0000 0000 0100	Alpha transparency 1
8		0000 0000 0000 0000 0000 1000	Alpha transparency 2
16		0000 0000 0000 0000 0001 0000	Opposite to flag 2
32		0000 0000 0000 0000 0010 0000	Indicates an object to be used inside an interior.
64		0000 0000 0000 0000 0100 0000	Disables the shadow mesh to project a shadow.
128		0000 0000 0000 0000 1000 0000	Object surface will not be culled.
256		0000 0000 0000 0001 0000 0000	Disables draw distance (Only used for LOD objects with an LOD value greater than 299).
512		0000 0000 0000 0010 0000 0000	Object is breakable (like glass – additional parameters defined inside the object.dat file, otherwise there is no effect).
1024		0000 0000 0000 0100 0000 0000	Similar to flag 512: object first cracks on a strong collision, then it breaks (does also require object.dat registration).
2048		0000 0000 0000 1000 0000 0000	Indicates an object as an garage door (for more information see GRGE – requires object.dat registration).
4096		0000 0000 0001 0000 0000 0000	Indicates an multiclump object (Object switches from clump 2 to clump 1 after collision – requires object.dat registration).
32768		0000 0000 1000 0000 0000 0000	Uses object brightness from the current weather definition (See timecyc.dat – PoleShd).
65536		0000 0001 0000 0000 0000 0000	Object explodes after getting hit (requires object.dat registration).
131072		0000 0010 0000 0000 0000 0000	Unknown – apparently some flag for the Script.
262144		0000 0100 0000 0000 0000 0000	Unknown – only used 1 time in San Andreas.
1048576		0000 1000 0000 0000 0000 0000	Object will switch from clump 2 to clump 1 after getting sprayed by the player (graffity flag).
2097152		0001 0000 0000 0000 0000 0000	Disables backface culling – as an result the texture will be drawed on both sides of the model (Always enabled for GTA III and Vice City)
4194304		0010 0000 0000 0000 0000 0000	Unknown – apparently related into physics.

For flags defining different aspects of different definitions read the articles about their sections.

Difference between GTA III and GTA IV engines

GTA IV not only uses different formats to the previous games, it also does not use ID's any longer in order to identify objects. While GTA III era games are using an ID as an index inside an array of definitions GTA IV uses the hashes of the model name as an key inside an hashtable. For more information about this see Map System.

Tools

•  GTAGarage: IDEditor - By Xmen
•  GTAForums: IDE-IV in GTA-IV script centre - by Gforce
• FlagValue Calculator - By Aschratt - Calculates all flagvalues (even those unknown).

References

• ^ Two's complement

External Links

•  GTAForums: GTAVC IDE Definitions - topic by ODIE covering specific details of IDE files in GTA VC
•  GTAForums: GTA3/VC Map File Documentation and Troubleshooting - topic by Opius covering general features of IDE files in GTA3 and GTA VC
• ID Flagvalue Decoding Project - project to decode all missing flag values