SFX (SA)

From GTAMods Wiki
Revision as of 15:25, 28 August 2020 by Squ1dd13 (talk | contribs) (New introduction & list of default packages)
Jump to navigation Jump to search

San Andreas uses a hierarchical system for managing sound effects, as opposed to the flat arrays of effects used in previous titles. Instead of individual sounds, SA has packages which group sounds based on where they are used in the game, and these sounds are further separated into banks based on what they are used for. Each bank may contain up to 200 sounds. The bank/package system allows the game to only load the sound(s) needed at the moment – in some instances, the game only loads a single sound from a bank (though it is more common for entire banks to be loaded at a time).

File Formats

The SFX config formats are pure dumps of game structures, so contain a lot of irrelevant data. They are stored in the audio/CONFIG directory and have the extension .dat.

PakFiles.dat

PakFiles.dat is a list of package names. Each name takes up 52 bytes.

// package count = file size / 52
type PackageList struct {
	Packages []string
}

The package names are the same as their file names inside the audio/SFX directory. In other files and also in the game, each package is referred to by its 0-based index in the package list (0, 1, 2, etc.).

BankLkup.dat

BankLkup.dat contains an array of metadata structures for all banks in all packages.

// 12 bytes
type BankMeta struct {
	// Index of package in PakFiles.dat
	PackageIndex uint8
	Padding      [3]uint8

	// Bank header location in package file.
	BankHeaderOffset uint32

	// Total size of sounds in bank.
	BankSize uint32
}

Note that the game uses hardcoded indices to reference specific banks, so changes in order can lead to problems.

Packages

Package files contain banks, which contain sound data (including the raw PCM data). Packages are in the audio/SFX directory and have no file extension.

An unmodified game has the following packages:

  • FEET
  • GENRL
  • PAIN_A
  • SCRIPT
  • SPC_EA
  • SPC_FA
  • SPC_GA
  • SPC_NA
  • SPC_PA

Each bank stored in a package file has two parts: the header and the PCM buffers. The PCM buffers follow the header. Most of the bank header is made up of sound metadata, which has the following structure:

type SoundMeta struct {
	// Offset of the PCM buffer from the end of the bank header.
	BufferOffset uint32

	// Where the start of the loop is (in samples).
	LoopOffset int32

	// Sample rate (measured in Hz).
	SampleRate uint16

	// Audio headroom. Defines how much louder than average
	//  this sound effect is expected to go.
	Headroom int16
}

The Headroom value tells the game how loud the sound will be. This allows the game to adjust what volume to play the sound at in order to prevent the audio clipping. A value of 0 tells the game that the sound is about average volume, with negative values meaning the sound is quieter and positive values meaning it's louder.

The actual bank header structure is as follows:

// 4084 bytes (including SoundMeta array)
type BankHeader struct {
	// The number of sounds in the bank. Must be <= 200.
	NumSounds uint16
	Padding   uint16

	// Sound metadata.
	Sounds [400]SoundMeta
}

The BankHeader structure's location is specified by the BankHeaderOffset value of the bank's BankMeta structure. Note that even though there is space in the header for 400 sounds, only 200 are allowed.

The audio sample buffers are all in signed 16-bit mono PCM format. The offset of a sound's PCM buffer can be calculated with the following function:

func (sound *SoundMeta) getPCMOffset(bankInfo *BankMeta) uint32 {
	// BankHeaderOffset is the offset of the start of the header,
	//  so the end of the header is 4804 bytes after.
	return bankInfo.BankHeaderOffset + 4804 + sound.BufferOffset
}

Since the SoundMeta structure does not specify the size of the buffer, it must be calculated. In the following code, bankAudioSize is BankMeta.BankSize for the current bank.

func calculateBufferSize(bankHeader *BankHeader, bankAudioSize uint32, soundIndex int) uint32 {
	sound := bankHeader.Sounds[soundIndex]

	var length uint32
	if soundIndex >= int(bankHeader.NumSounds-1) {
		// This is the final sound in the bank, so we need to use the size of the bank
		//  to calculate the length of the sound's buffer.
		length = bankAudioSize - sound.BufferOffset
	} else {
		// length = this sound offset - next sound offset
		// This works because the buffers are stored contiguously in the file.
		length = bankHeader.Sounds[soundIndex+1].BufferOffset - sound.BufferOffset
	}

	return length
}

BankSlot.dat

A bank slot is capable of storing some SFX data, this data can be either one entire bank or one single sound from a bank. There is a total of 45 bank slots.

Each bank slot is used by a specific audio class of the game, for example 10 slots are used for vehicle banks, one slot for the bank of explosions, 4 slots for script speeches (which stores single sounds), and so on.

The BankSlot.dat file's structure is

type SlotFile struct {
	// Always 45
	NumSlots uint16
	Slots    [45]Slot
}

where Slot is

type Slot struct {
	// Sum of all buffer sizes before this slot (i.e. the offset).
	BufferOffset uint32

	// Buffer size for this slot.
	BufferSize uint32

	// {-1, -1} on disk. Related to feet sounds?
	Unknown [2]int32
	
	Ignored [4804]byte
}

Each slot owns a buffer capable of storing some amount of sound data. If this size is lower than the size of the data stored in the slot, sound artifacts will occur in-game.

By default, those buffer sizes are arbitrary values, but it can safely be the size of the highest bank stored in the slot or the size of the highest sound stored in the slot, depending if the slot is used to store a sound or a bank.

Scripting

Sounds can be used in SCM with the following opcodes:

  • 018C – Plays a sound on a specific location
  • 018E – Stops the played sound
  • 03CF – Loads a sound
  • 03D0 – Checks if sound has been loaded
  • 03D1 – Plays the loaded sound
  • 03D2 – Checks if the loaded sound has finished
  • 097A – Plays a audio event
  • 097B – Plays a audio event in an object
  • 09F1 – Plays a audio event in a character
  • 09F7 – Plays a audio event in a vehicle
  • 09D6 – Makes a character say a scripted speech

Tools

  • San Andreas Audio Toolkit – Allows you to modify SFX Packages – It contains a bug related to bank slots causing sound artifacts
  • GTA Net GTAForums: Mod Loader – Allows you to easily change SFX data and fixes the sound artifacts on big sounds.
  • GTA Net GTAForums: Dynamic SFX – Fixes sound artifacts caused by sounds bigger than the original.

See also

External links